Harman/Kardon

Harman Kardon Citation Sub

Details
Variations

Bass uy lực cho nhạc phim chân thực

₫ 21,800,000 2.18E7 Cái
Đối với yêu cầu số lượng lớn: Ấn vào đây

Âm thanh tuyệt đỉnh, trò chuyện thông minh.

Loa Harman Kardon Citation Sub là thế hệ tiếp theo của loa siêu trầm không dây. Dễ dàng thiết lập và sử dụng, Citation Sub hòa quyện công nghệ đỉnh cao trong âm thanh gia đình với sự tỉ mỉ đến từng chi tiết trong thiết kế, tất cả mang tới một vẻ tinh tế bên ngoài, uy lực bên trong cho mọi trải nghiệm xem phim hay nghe nhạc khi kết nối với loa thanh Citation Bar hay loa tháp Citation Tower. Tận hưởng âm thanh như rạp phim với kênh 5.1 không cần dây kết nối. Với phần mềm tự động cập nhật, Citation Sub sẽ luôn hoạt động mượt mà và ổn định nhất.

Mục# HKCITATIONSUBGRYAS

thông tin chi tiết

Nguồn cấp 100-240V~50/60Hz
Điện năng tiêu thụ ở chế độ ngủ <2.0Watts
Nguồn phát 5GWISA <14dBm
5GWISA modulation OFDM, BPSK, QPSK, 16QAM
Dải tần số bộ phát 5GWISA 5.15-5.35GHz, 5.470-5.725GHz, 5.725-5.825GHz
Lưu ý Sản phẩm này được thiết kế để bật ngay lập tức và sẵn sàng nhận tín hiệu từ WiSA Tx Unit tức thì, kết nối không dây phải luôn hoạt động để đảm bảo loa được vận hành chuẩn xác. Sản phẩm này tuân thủ luật pháp về năng lượng của Liên minh Châu Âu. Sản phẩm sẽ chuyển sang chế độ ngủ (chế độ chờ được nối mạng) sau 15 phút nếu như không được vận hành, sau đó có thể kích hoạt lại qua kết nối không dây.

thông số kỹ thuật

Transducer 1 x 10" subwoofer
Output power 200W RMS
Signal-to-noise ratio >80dB

Kích thước

Kích thước (Rộng x Cao x Sâu) 447 x 334 x 367 mm (17.6” x 13” x 14.4”)
Kích thước đóng gói (Rộng x Cao x Sâu) 530 x 386 x 427 mm (20.9” x 15.2” x 16.8”)
Trọng lượng 14.35 kg (32 lb)
Trọng lượng đóng gói (toàn bộ)
Click here for a complete list of all specs for this product

Spec Sheet (Anh)

Tiếng Việt 1 MB
  • 1 x Citation Sub
  • 1 x Hướng dẫn sử dụng
  • 1 x Thẻ bảo hành
  • 1 x Hướng dẫn an toàn
  • 1 x dây cáp nguồn (1.8mm)
product box
{"totalSize":3,"done":true,"searchRecords":[{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XjV7AAK"},"Title":"HK CITATION: WiSA Technology & Compatibility","Id":"ka25d000000XjV7AAK","ArticleNumber":"000018687","Question__c":"CITATION SERIES: WiSA Technology & Compatibility","Process__c":"

General information about WiSA:

\nWiSA is a wireless system designed specifically for audio and speakers. An audio system that incorporates WiSA technology has it's own internal wireless system. It is capable of doing 96kHz/24bit audio with an audio latency of only 5ms, virtually undetectable by the human ear.

For more information on WiSA technology, please go to the official WiSA website.

If a product is WiSA Certified, it can be used with any other WiSA certified product. For example a WiSA Ready TV with at transmitter.
Note: The overall sound quality is dependent on the processing and setup in the WiSA TV & transmitter, and may result in a performance (EQ, crossover and levels) not intended by the speaker manufacturer. To be sure that the Citation products sound the best, use a Citation Bar product as the main "hub".\n


Current WiSA Certified products:

\nCitation Surrounds
Citation Sub
Citation Sub S
Citation Towers\n


Current products making use of WiSA technology:

\nCitation Bar
Citation Multibeam 700
HK surround\n


Limitations:

\nWiSA does not offer 3D audio formats like Dolby Atmos, and DTS:X yet, so at the moment it is limited to 5.1 or 7.1 Dolby Digital. So regardless of which brand of WiSA speaker you choose, Dolby Atmos will not be available yet.","Answer__c":"

General information about WiSA:

\nWiSA is a wireless system designed specifically for audio and speakers. An audio system that incorporates WiSA technology has it's own internal wireless system. It is capable of doing 96kHz/24bit audio with an audio latency of only 5ms, virtually undetectable by the human ear.

For more information on WiSA technology, please go to the official WiSA website.

If a product is WiSA Certified, it can be used with any other WiSA certified product. For example a WiSA Ready TV with at transmitter.
Note: The overall sound quality is dependent on the processing and setup in the WiSA TV & transmitter, and may result in a performance (EQ, crossover and levels) not intended by the speaker manufacturer. To be sure that the Citation products sound the best, use a Citation Bar product as the main "hub".\n


Current WiSA Certified products:

\nCitation Surrounds
Citation Sub
Citation Sub S
Citation Towers\n


Current products making use of WiSA technology:

\nCitation Bar
Citation Multibeam 700
HK surround\n


Limitations:

\nWiSA does not offer 3D audio formats like Dolby Atmos, and DTS:X yet, so at the moment it is limited to 5.1 or 7.1 Dolby Digital. So regardless of which brand of WiSA speaker you choose, Dolby Atmos will not be available yet.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XjJaAAK"},"Title":"HK Citation: Cleaning FAQ","Id":"ka25d000000XjJaAAK","ArticleNumber":"000016804","Question__c":"How to properly clean the fabric around the speakers","Process__c":"Daily Care instructions for Citation speakers fabric (wool)\nDaily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years.\nNever use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself!\n\nMany types of stain can be removed using warm water with a microfiber cloth (not too wet).\nStain removal guide\nIf you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains.\nHere is how to do it.\n\nFirst, soak up the liquid with an absorbent napkin or Microfiber cloth.\nFor dried stains use a spoon to roughen the surface.\nTo avoid the stain spreading further start from the edge of the stain working towards the middle.\nWARNING!\nBe careful when using solvents, because these could dissolve the upholstery material beneath.\nRegular and normal cleaning\nVacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth.\nWhen using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric).\n \n\n\nGeneral information\nThese tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device.\nIn all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker.\nHARMAN do not have any recommended companies or partners to redirect any customers too.\n\nFor furter information we advise visiting the fabric company called KVADRAT by clicking on these links below:\nhttps://kvadrat.dk/care-and-maintenance/upholsteries\nhttps://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf \n\nThere are a lot of information about the fabric we are using and you can contact them for further information.","Answer__c":"Daily Care instructions for Citation speakers fabric (wool)\nDaily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years.\nNever use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself!\n\nMany types of stain can be removed using warm water with a microfiber cloth (not too wet).\nStain removal guide\nIf you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains.\nHere is how to do it.\n\nFirst, soak up the liquid with an absorbent napkin or Microfiber cloth.\nFor dried stains use a spoon to roughen the surface.\nTo avoid the stain spreading further start from the edge of the stain working towards the middle.\nWARNING!\nBe careful when using solvents, because these could dissolve the upholstery material beneath.\nRegular and normal cleaning\nVacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth.\nWhen using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric).\n \n\n\nGeneral information\nThese tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device.\nIn all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker.\nHARMAN do not have any recommended companies or partners to redirect any customers too.\n\nFor furter information we advise visiting the fabric company called KVADRAT by clicking on these links below:\nhttps://kvadrat.dk/care-and-maintenance/upholsteries\nhttps://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf \n\nThere are a lot of information about the fabric we are using and you can contact them for further information.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XjJcAAK"},"Title":"HK Citation: Cleaning the speakers","Id":"ka25d000000XjJcAAK","ArticleNumber":"000016795","Question__c":"How to properly clean the fabric around the speakers","Process__c":"

Daily Care instructions for Citation speakers fabric (wool)

\n\n

Daily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years.
Never use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself!

\nMany types of stain can be removed using warm water with a microfiber cloth (not too wet). \n\n

Stain removal guide

\n\n

If you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains.
Here is how to do it.

\n\n
  1. First, soak up the liquid with an absorbent napkin or Microfiber cloth.
  2. For dried stains use a spoon to roughen the surface. \n\t
    1. To avoid the stain spreading further start from the edge of the stain working towards the middle.
    \n\t
  3. WARNING!\n\t
    1. Be careful when using solvents, because these could dissolve the upholstery material beneath.
    \n\t
\n\n

Regular and normal cleaning

\n\n

Vacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth.
When using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric).
 

\n\n


General information

\n\n

These tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device.
In all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker.
HARMAN do not have any recommended companies or partners to redirect any customers too.

For furter information we advise visiting the fabric company called KVADRAT by clicking on these links below:

https://kvadrat.dk/care-and-maintenance/upholsteries
https://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf

There are a lot of information about the fabric we are using and you can contact them for further information.

","Answer__c":"

Daily Care instructions for Citation speakers fabric (wool)

\n\n

Daily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years.
Never use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself!

\nMany types of stain can be removed using warm water with a microfiber cloth (not too wet). \n\n

Stain removal guide

\n\n

If you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains.
Here is how to do it.

\n\n
  1. First, soak up the liquid with an absorbent napkin or Microfiber cloth.
  2. For dried stains use a spoon to roughen the surface. \n\t
    1. To avoid the stain spreading further start from the edge of the stain working towards the middle.
    \n\t
  3. WARNING!\n\t
    1. Be careful when using solvents, because these could dissolve the upholstery material beneath.
    \n\t
\n\n

Regular and normal cleaning

\n\n

Vacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth.
When using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric).
 

\n\n


General information

\n\n

These tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device.
In all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker.
HARMAN do not have any recommended companies or partners to redirect any customers too.

For furter information we advise visiting the fabric company called KVADRAT by clicking on these links below:

https://kvadrat.dk/care-and-maintenance/upholsteries
https://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf

There are a lot of information about the fabric we are using and you can contact them for further information.

","ArticleType":"How_Tos__kav"}]}

Câu hỏi thường gặp